zorx

Waveform Mewsic Box 60 HP Eurorack Case

$89.00
Write a Review
We're excited to announce the new Waveform Mewsic Box 60HP Eurorack case! With our Waveform Catwalk heads emblazoned throughout for a very Mewy Vuitton look, the Mewsic Box not only looks like a top shelf luxury item, but it also comes with almost everything you need: rails, screws and more! Power adapter sold separately-see below.
 
Made of extremely sturdy FR-4 glass reinforced black epoxy laminate and with the option to add a handy plant/mini patch cable holder, as well as the soon-to-be-released Meow Mixer (sold separately), a space saving 3-channel mixer that attaches to the rear of the case freeing up precious HP, along with the ability to add more HP saving Waveform Catwalk utility modules such as the Catwalk Mult and the Cattenuator, AND the option to add powered internal speakers (sold separately), we think the feature rich Waveform Mewsic Box is the cat's meow!
 
The Mewsic Box comes only as a DIY kit. You will have to solder some filter capacitors and the power headers. You will need a Philips screwdriver and pliers or a small wrench to put it all together, but this is a very doable project for anybody who's ever used a soldering iron. A build guide will be provided.
You will need to supply the correct AC to AC power adapter.
 
MAKE SURE TO USE A 12V AC TO AC ADAPTER, NOT AN AC TO DC ADAPTER.
We recommend the following US AC to AC adapters:
 
 
The Mewsic Box measures approximately 130mm x 90mm x 305mm and supplies +12V, -12V, and +5V.
The power adapter you purchase will determine how much power is supplied.
 
Build and use at your own risk! Waveform is not responsible for damage that comes from building, using, misusing, or installing the Mewsic Box, so take your time and build it correctly. Power PCB is intended for use only with Waveform Mewsic Box and not sold separately.

**Assembly will be required. Tools needed are Philips screwdriver, pliers or small wrench, and soldering iron/solder.

***Plant/cable holder works best using appropriate size patch cables and plants! Plant cutout is 50mm in diameter.

****Speakers come with a small amplifier pre-soldered PCB with purchase, so no external module will be needed to power it, but you will need to wire it up. It's easy, and instructions will be included in the build guide.

**Modules shown in photos not included.

 

Videos Hide Videos Show Videos