KIT VERSIONS COME WITH ENOUGH COMPONENTS FOR 2 X MODULES (EITHER 1 VCA + 1 LPG, OR 2 VCAs or 2 LPGs). THE ASSEMBLED VERSION COMES WITH 1 X VCA AND 1 X LPG BY DEFAULT. If you want 2 x LPGs or 2 X VCAs instead of one of each, please contact us immediately after purchase.
The Catwalk LPG/VCA is Waveform's DIY Project #5. These take up no HP by attaching to your Eurorack system over top of existing modules, where they rise above the faceplates of the modules they're over top of so there's no contact with the modules below other than the screw holes where the standoffs are.. By switching out one component this can be either a Low Pass Gate or Voltage Controlled Amplifier (actually, since it's passive, it's an attenuator NOT an amplifier), and the faceplate is reverseable to show if it's a VCA or LPG. These are pretty easy to build, though it does take some maneuvering to get the parts to fit right. The instructions on how to build this are detailed in Waveform issue #5 and can also be found on our Build Guide page. Faceplate is black with silver. The Catwalk LPG/VCA is 75mm in length and the screw holes fit over approx. 16 HP.
Note: These come with M3 screws and standoffs.
