The Waveform Catwalk Headphone Mixer is a passive module that floats above your existing modules taking up 0 HP, like the rest of our Catwalk modules by attaching to your Eurorack system over top of existing modules, where they rise above the faceplates of the modules they're over top of so there's no contact with the modules below other than the screw holes where the standoffs are. It's basically a dual channel passive attenuator utility with a stereo out. Channel 1 is normalled into Channel 2 so that one signal will go to both channels in your headphones when patched into Channel 1. Both channels volume are adjusted separately, and the passive design works well with the high output that most Eurorack modules have. These are pretty easy to build, and the instructions on how to build this can be found on our Build Guide page with the Issue #7 projects. Faceplate is black with silver.
PLEASE NOTE THAT THIS IS PASSIVE AND WILL NOT AMPLIFY YOUR SIGNAL BUT WILL ALLOW AN EASY WAY TO GET A HEADPHONE OUTPUT IN YOUR SYSTEM.
All Waveform Catwalk modules come with M3 Eurorack screws and M3 standoffs.