The Waveform Dual Low Pass Gate 2LPG Crossmod is a 2HP 2-channel passive Eurorack module. Each channel consists of a CV in, a signal Input and a signal Output. Each channel can operate on its own, as a two-channel LPG. This is how most passive LPGs operate, and the WDLPGCM can be configured in this way as well. What makes the WDLPGCM different is that, by soldering a series of small pads (jumpers) on the back of the module, it intertwines the two channels, so they interfere with the other in slightly unpredictable ways. This can create interesting modulation and sound opportunities, where you can use one input signal for both channels, one CV input for both channels, and the output of one channel for the input of another. This can get especially interesting, where one channel’s CV can bleed into the other, creating something like echoes of modulation. This is accomplished by normalization throughout the entire circuit (connecting the jumpers), as seen in the normalization signal flow chart. Again, the normalization only happens when the jumper pads are soldered and this action can be undone if desired. Again, if this is not done, if the normalization is not implemented, WDLPGCM operates as two distinct channels, unbothered by the other.
The faceplate is black with silver and is reversible, with a bunch of cats on one side, and a more streamlined black panel on the other. The cat's eyes light up in relation to the patched in CV. This module is 2 Hp and this comes with M3 screws.
If you are purchasing the DIY kit version, please make sure to read through the build instructions before purchase. This is a medium level build, about a 3 out of 5 difficulty. Take your time and you will have no problems. The instructions on how to build this can be found on our Build Guide page.
If you are purchasing the assembled version, please pick the desired version, either experimental (normalized connections), or traditional.
