The Waveform Catwalk 84HP CV Bus takes up no HP in your rig, and was inspired by the Buchla Music Easel's row of jacks that lets you easily distribute CV and (and in our case, audio, too) easily throughout your system. There are four channels, each denoted by the shape (or lack thereof) surrounding the jacks; square, round, blank, and octagonal. Since the CV Bus is passive, any of the related jacks can be either an input or an output. The four outputs (or inputs?!) on the far right are attenuators, and attenuate their respective connected output (or input).
This is an easy project to build. It's fully passive, with only jacks and pots to solder. Take your time and you should have a successful build. When completed and correctly mounted, the Catwalk 84HP CV Bus will go over top of almost all modules, even those with longer screws like Knurlies, etc. without interference from them.
Faceplate is black and silver.
Note: These come with M3 screws and standoffs.
Build guide can be found here, on our Build Guide page.
